1/4 turn fastener
- Garry and Chris
- Topic Author
- Offline
Less
More
- Posts: 57
28 Nov 2012 13:07 #1
by Garry and Chris
OKA 306
Garry and Chris created the topic: 1/4 turn fastener
Anyone know where I can get the 1/4 turn fasteners that hold grill in place and bonnet down on LTs We are current in Perth probably leave Sunday start to head East
Garry
Garry
OKA 306
Please Log in or Create an account to join the conversation.
- Len208
- Offline
Less
More
- Posts: 98
28 Nov 2012 16:54 #2
by Len208
Len208 replied the topic: 1/4 turn fastener
Garry,I got some from Alan at oka a couple of years ago.Maybe he still has some.Len
Please Log in or Create an account to join the conversation.
- Garry and Chris
- Topic Author
- Offline
Less
More
- Posts: 57
28 Nov 2012 17:18 #3
by Garry and Chris
OKA 306
Garry and Chris replied the topic: 1/4 turn fastener
Thanks Len I tried Alan last week no go
OKA 306
Please Log in or Create an account to join the conversation.
- MichaelLHession
- Offline
Less
More
- Posts: 27
28 Nov 2012 17:34 #4
by MichaelLHession
Michael Hession
OKA 160
MichaelLHession replied the topic: 1/4 turn fastener
Garry,
Try This, it looks promising.
A search on Google came up with Concept Latch Lock & Hinge in Brunswick VIC
Look for BIFIX Quarter Turn Fasteners.
www.conceptlatch.com.au/Product/Shop/BIF...tener-BFIX00001.aspx
Click on the download link for product information
Hope this helps
Michael Hession
Try This, it looks promising.
A search on Google came up with Concept Latch Lock & Hinge in Brunswick VIC
Look for BIFIX Quarter Turn Fasteners.
www.conceptlatch.com.au/Product/Shop/BIF...tener-BFIX00001.aspx
Click on the download link for product information
Hope this helps
Michael Hession
Michael Hession
OKA 160
The following user(s) said Thank You: Hal Harvey, Garry and Chris
Please Log in or Create an account to join the conversation.
- Garry and Chris
- Topic Author
- Offline
Less
More
- Posts: 57
28 Nov 2012 17:48 #5
by Garry and Chris
OKA 306
Garry and Chris replied the topic: 1/4 turn fastener
Thanks Micheal looks good I'll ring them tomorrow
OKA 306
Please Log in or Create an account to join the conversation.
- outyonda
- Offline
Less
More
- Posts: 780
28 Nov 2012 18:56 #6
by outyonda
OKAs 091, 093, 094, 113, 346x6 & 405
outyonda replied the topic: 1/4 turn fastener
wood tech screws do the job
OKAs 091, 093, 094, 113, 346x6 & 405
Please Log in or Create an account to join the conversation.
- Peter and Sandra OKA 374
- Offline
Less
More
- Posts: 1321
29 Nov 2012 01:45 #7
by Peter and Sandra OKA 374
OKA 374 LT Van, converted to camper/motorhome,
400ah Lithiums, 1100w solar, diesel cooking heating and HWS,
Cummins 6BT, Allison 6 speed auto, Nissan transfer.
Peter and Sandra OKA 374 replied the topic: 1/4 turn fastener
The Yanks call them Zeus fasteners
OKA 374 LT Van, converted to camper/motorhome,
400ah Lithiums, 1100w solar, diesel cooking heating and HWS,
Cummins 6BT, Allison 6 speed auto, Nissan transfer.
Please Log in or Create an account to join the conversation.
- Hal Harvey
- Offline
Less
More
- Posts: 275
29 Nov 2012 09:32 #8
by Hal Harvey
Principal advisor to the Minister for Tourism, Liza Harvey MLA
... OKA 260 ... "I'm not leaving any sooner than I have to!"
www.byles.net/OLDportal/members-vehicles-public/5-oka-260
Hal Harvey replied the topic: 1/4 turn fastener
They pronounce them Zeus, but they spell them Dzus, after the fella who
invented
them in New York 80 years ago. But more importantly, thanks to Michael, as of this morning I now know that the bonnet fasteners on the OKA are not Dzus fasteners but are actually Bi-Fix fasteners... and this is deep and meaningful because I have finally come to the realisation that, unlike all the Dzus fasteners I have dotted over various vehicles, the bonnet fasteners on the OKA aren't meant to close with a quarter turn - they lock down with a straight push!
They are a quarter-turn-to-open, not close.
Now all the rest of you have probably been closing the bonnet properly forever, but because I've always been used to the Dzus quarter-turn-to-close fasteners, I've always tried to close the bonnet with a Dzus tool (or a big screwdriver), without ever stopping to look at what it was underneath the panel. And it's not a quarter-turn-to-close, and I never needed a tool. Talk about slow on the uptake.
Dzus also make some push-to-close fasteners, but they're not what I have on anything. Even on the OKA I use Dzus fasteners to attach the licence plates, because the front one gets swapped from the bullbar to a recovery gear box to a cooler rack regularly, and the rear one gets shifted from the usual spot to out on a bike rack occasionally. I got ones that need a hex drive to remove, to make it harder for the villains (from experience).
They are a quarter-turn-to-open, not close.
Now all the rest of you have probably been closing the bonnet properly forever, but because I've always been used to the Dzus quarter-turn-to-close fasteners, I've always tried to close the bonnet with a Dzus tool (or a big screwdriver), without ever stopping to look at what it was underneath the panel. And it's not a quarter-turn-to-close, and I never needed a tool. Talk about slow on the uptake.
Dzus also make some push-to-close fasteners, but they're not what I have on anything. Even on the OKA I use Dzus fasteners to attach the licence plates, because the front one gets swapped from the bullbar to a recovery gear box to a cooler rack regularly, and the rear one gets shifted from the usual spot to out on a bike rack occasionally. I got ones that need a hex drive to remove, to make it harder for the villains (from experience).
Principal advisor to the Minister for Tourism, Liza Harvey MLA
... OKA 260 ... "I'm not leaving any sooner than I have to!"
www.byles.net/OLDportal/members-vehicles-public/5-oka-260
Please Log in or Create an account to join the conversation.
- Oka Parts
- Offline
10 Dec 2012 09:58 #9
by Oka Parts
OKA Parts Australia, 24 Murphy Street, O'Connor WA +61 892236195
Oka Parts replied the topic: 1/4 turn fastener
Just a note
As we have had some enquirers we are currently restocking with a supply of 1/4 turn fasteners
When they are in stock Ill post another Reply
Allan Gorham
As we have had some enquirers we are currently restocking with a supply of 1/4 turn fasteners
When they are in stock Ill post another Reply
Allan Gorham
OKA Parts Australia, 24 Murphy Street, O'Connor WA +61 892236195
Please Log in or Create an account to join the conversation.